XYZ Components

This section describes each of the components in detail and explains the importing process.

The only way to configure XYZ-related data elements in ProTrack Warehouse is by building an import file, and importing the elements one at a time. This section refers to the spreadsheet, “SOP for XYZ Importing.xls”. This is the official document containing import templates for each XYZ component. Each tab of the workbook must be completed prior to importing the data elements.

Coordinate System Origin – Coordinate values cannot be negative, thus the origin should be set with large enough to allow floors to grow in any direction. For example, the origin could be treated as (1000, 1000). When viewing a facility’s layout in ProTrack Warehouse using the Facility Layout Java applet, the coordinate system axes are orientated such that the x-axis points to the right and the y-axis points downward. In other words, the x-coordinates ascend as you move to the right and the y-coordinates ascend as you move downward.

Location Data Element Naming Conventions – It is recommended that the following naming conventions be followed to so that the user easily knows where the data element is located on the Facility Layout.

Data Element	Naming Convention	Naming Convention Example	Comment
Facility	FAC	DC1	Facility ID must match EXACTLY what is configured in ProTrack Warehouse and being sent in the WMS extraction file.
Floor	FAC-FLR	DC1-FLR1
Aisle Path	FAC-FLR-AISLE	DC1-FLR1-04A	When two or more Aisle Paths are needed for a single rack (i.e. due to a non-passable barriers such as a security cage fence), append lowercase letters to the AISLE element.
Segment	FAC-FLR-AISLE-1	DC1-FLR1-04A-1	The ‘-1’ suffix increments (‘-2’, ‘-3’, etc.) with additional Segments on a single Aisle Path.
Location	FAC-LOC	DC1-032457	Must match the ‘To Location’ field EXACTLY being sent in the WMS extraction file.
Travel Path	FAC-FLR1-FLR2-1	DC1-FLR1-FLR2-1

^{Table 37. Naming Conventions}

Floor

A floor is the lowest level component of XYZ mapping. A facility can have multiple floors, which may or may not represent various actual floors in the warehouse. Floors can be used for this purpose (such as in mezzanine areas), or they may be used to simply divide a large single floor into multiple smaller sections. Any component added to the floor should be inside the floor.

Please refer to the Floor tab of the current “SOP for XYZ Importing” Excel spreadsheet.

Floor ID	Floor Name	Description	Start X	Start Y	End X	End Y	Width	Facility ID
1-FLR1	1-FLR1	Chicago - First floor	4000	2500	8000	5000	4000	1
2-FLR1	2-FLR1	Joliet - First floor	2000	2000	6600	5000	4600	2

^{Table 38. Floor Example}

Info

Commas ( , ) are not allowed in description fields for any .csv import file, as ProTrack Warehouse will treat the comma as a field separator and the file will error out.

Field	Description
Floor Name	Name of the floor.
Start X	X value of the start co-ordinate of the floor.
Start Y	Y value of the start co-ordinate of the floor.
End X	X value of the end co-ordinate of the floor. This value should be equal to start X.
End Y	Y value of the end co-ordinate of the floor.
Height	This is for future development, and thus not currently available in this version of *ProTrack* Warehouse**.
Width	Width of the floor.
Description	Description of the floor.

^{Table 39. Floor Field Descriptions}

To view a floor in ProTrack Warehouse:

Access the Facility Layout screen, and click .
Select the facility name from the Facility list and floor name from the Floor list and click . The selected floor will be displayed.

^{Fig.211 Facility Layout Viewer - Floor}

Aisle Paths

An Aisle Path is a passable travel space over which equipment or people travel. An Aisle path resides on a floor and may have Segments around it. Nodes are created on the Aisle Path, at its intersections and end points. Multiple Aisle Paths can intersect.

Please refer to the Aisle Path tab of the current “SOP for XYZ Importing” Excel spreadsheet.

Aisle ID	Aisle Name	Start X	Start Y	End X	End Y	Floor ID	Numbering Direction	Numbering Scheme	Travel Rule	path_access_rule
1-FLR1-100	1-FLR1-100	4200	2800	4300	2800	1-FLR1	ALT_LR_ES	DUB_INC	DIRECT	BD
1-FLR1-101	1-FLR1-101	4200	3000	4300	3000	1-FLR1	ALT_LR_ES	DUB_INC	DIRECT	BD
1-FLR1-102	1-FLR1-102	4200	2800	4200	3000	1-FLR1	ALT_LR_ES	DUB_INC	DIRECT	BD
1-FLR1-103	1-FLR1-103	4250	2800	4250	3000	1-FLR1	ALT_LR_ES	DUB_INC	DIRECT	BD
1-FLR1-104	1-FLR1-104	4300	2800	4300	2900	1-FLR1	ALT_LR_ES	DUB_INC	DIRECT	BD
1-FLR1-104a	1-FLR1-104a	4300	2910	4300	3000	1-FLR1	ALT_LR_ES	DUB_INC	DIRECT	BD

^{Table 40. Aisle Path Examples}

Field	Description
Path ID	ID of the aisle path.
Path Name	Name of the aisle path.
Start X	X value of the start co-ordinate of the aisle path.
Start Y	Y value of the start co-ordinate of the aisle path.
End X	X value of the end co-ordinate of the aisle path.
End Y	Y value of the end co-ordinate of the aisle path.
Numbering Direction	This is for future development, and thus not currently available in this version of ProTrack Warehouse. This is a mandatory field, so populate with the default value from the table above.
Numbering Scheme	This is for future development, and thus not currently available in this version of ProTrack Warehouse. This is a mandatory field, so populate with the default value from the table above.
Travel Rule	This is for future development, and thus not currently available in this version of ProTrack Warehouse. This is a mandatory field, so populate with the default value from the table above.
path_access_rule	This is for future development, and thus not currently available in this version of ProTrack Warehouse. This is a mandatory field, so populate with the default value from the table above.

^{Table 41. Aisle Path Field Descriptions}

Tips

Aisle Path name and ID are recommended to be the same.
Aisle Paths 1-FLR1-104 and 1-FLR1-104a should be two Aisle Paths as they are divided by a non-passable fence, even though they are both vertical Aisle Paths with the same X coordinates.
Aisle Paths must be configured at 90-degree angles. Two aisle paths cannot converge at a single point and both be horizontal or both be vertical. In these cases, the two should just be treated as one Aisle Path.
Aisle Paths cannot be built on the edge of a Floor, so make sure the Floor is larger than the location of the Aisle Paths.

To view Aisle Paths in ProTrack Warehouse:

Access the Facility Layout screen, and click .
Select the facility name from the Facility list and floor name from the Floor list and click . The selected floor will be displayed.
Select an aisle path to view the Aisle Path Properties.

^{Fig.212 Facility Layout Viewer - Aisle Path}

Travel Paths

A Travel Path is a connection between two different floors. In the actual warehouse, this may be at a staircase, an elevator, or just any point where two floors connect. Travel paths are similar to Aisle Paths in that they are lines over which travel is calculated, but their sole purpose is to connect two floors. Travel Paths start at one node on a starting floor and end at another node on the ending floor.

Please refer to the Travel Path tab of the current “SOP for XYZ Importing” Excel spreadsheet.

travel_id	travel_name	description	start_X	start_Y	end_X	end_Y	end_ floor_id	begin_floor_id	barrier	path_access_rule
DC1-1-2-A	DC1-1-2-A	south stairs	1005	2050	1006	2050	FLR2	FLR1	N	BD
DC1-1-2-B	DC1-1-2-B	east stairs	1500	1910	1500	1911	FLR2	FLR1	N	BD
DC1-2-3-A	DC1-2-3-A	service elev	1005	2050	1006	2050	FLR3	FLR2	N	BD

^{Table 42. Travel Path Examples}

Field	Description
Travel Path ID	ID of the Travel Path.
Travel Path Name	Name of the Travel Path.
Description	Description of the Travel Path.
Start X	X value of the start coordinate of the Travel Path.
Start Y	Y value of the start co-ordinate of the Travel Path.
End X	X value of the end co-ordinate of the Travel Path.
End Y	Y value of the end co-ordinate of the Travel Path.
End Floor Id	Floor ID corresponding to the node at the X,Y coordinate specified in the End X and End Y fields.
Begin Floor Id	Floor ID corresponding to the node at the X,Y coordinate specified in the Start X and Start Y fields.
Barrier	This is for future development, and thus not currently available in this version of ProTrack Warehouse. This is a mandatory field, so populate with the default value from the table above.
Path Access Rule	This is for future development, and thus not currently available in this version of ProTrack Warehouse. This is a mandatory field, so populate with the default value from the table above.
Width	This is for future development, and thus not currently available in this version of ProTrack Warehouse.This is a mandatory field, so populate with the default value from the table above.

^{Table 43. Travel Path Field Descriptions}

Tips

Travel Paths must have some “length” to them. I.e. the start and end coordinates cannot lie on the same point.
The start and end points specified in the Travel Path import file should intersect with Aisle Paths, thus linking two Aisle Paths on two different floors.
Like Aisle Paths, Travel Paths MUST be either horizontal or vertical. They cannot be diagonal. This means that the Start and End coordinates must be either above or below one another, or side-by-side.

To view Travel Paths in ProTrack Warehouse:

Access the Facility Layout screen, and click .
Select the facility name from the Facility list and floor name from the Floor list and click . The selected floor will be displayed.
A Travel Path is displayed as a larger grey circle overlapping a node.

^{Fig.213 Facility Layout Viewer - Travel Path}

Nodes

Nodes will be present at both the ends and intersections of Aisle Paths and Travel Paths. Nodes are not imported like the other components, but are instead generated via the Facility Import screen. Nodes are generated on a per-floor basis and thus must be generated for each individual floor.

Info

Nodes are to be generated after the Aisle Paths and Travel Paths have been imported.

To generate Nodes:

Access the Facility Layout screen, and click .
Select the facility name from the Facility list and floor name from the Floor list and click . The selected floor will be displayed.
Click on the Floor and the Floor Properties screen will display.
Click on the properties screen.
Nodes will be generated and displayed on the floor.
Click .
Click .
Repeat for all Floors.

^{Fig.214 Facility Layout Viewer - Nodes}

Segments

A Segment contains one or more locations, and thus typically represents racking. However, locations cannot exist outside of a Segment, regardless of whether or not the actual point in the warehouse is at a rack location. Segments are associated to Aisle Paths; no Segment can exist without an Aisle Path.

Please refer to the Segment tab of the current “SOP for XYZ Importing” Excel spreadsheet.

Segment ID	Segment Name	Inset	Offset	Length	Width	Orientation	Number_Scheme	Number_Direction	Aisle_ID	Floor_ID
1-FLR1-100-A	1-FLR1-100-A	1	-2	98	4	Left	DUB_INC	ALT_LR_ES	1-FLR1-100	FLR1
1-FLR1-104-A	1-FLR1-104-A	1	-2	98	4	Left	DUB_INC	ALT_LR_ES	1-FLR1-104	FLR1
1-FLR1-104a-A	1-FLR1-104a-A	111	-2	88	4	Left	DUB_INC	ALT_LR_ES	1-FLR1-104a	FLR1

^{Table 44. Segment Examples}

Field	Description
Segment ID	ID of the segment.
Segment Name	Name of the segment.
Aisle Name	Name of the aisle path to which the segment is associated.
Inset	Distance from the aisle starting point to the segment.
Offset	Distance from aisle axis to the segment.
Width	Width of the segment.
Length	Length of the segment.
Numbering Scheme	This is for future development, and thus not currently available in this version of ProTrack Warehouse. This is a mandatory field, so populate with the default value from the table above.
Numbering Direction	This is for future development, and thus not currently available in this version of ProTrack Warehouse. This is a mandatory field, so populate with the default value in from the table above.
Start Bay Number	This is for future development, and thus not currently available in this version of ProTrack Warehouse. This is a mandatory field, so populate with the default value from the table above.
Number of Bays	This is for future development, and thus not currently available in this version of ProTrack Warehouse. This is a mandatory field, so populate with the default value from the table above.
Orientation	Orientation of the Segment as it relates to the Aisle Path.
Description	Description of the segment.

^{Table 45. Segment Field Descriptions}

In the example illustrations that follow, the blue shaded area is the segment. Each cell is 2’ by 2’, so the width of the segment is 4’.

^{Fig.215 Segment Orientations}

Tips

Segments cannot intersect a node.
Locations must reside within the coordinates that the Segment occupies. Travel is not calculated from the center of the aisle to the front of the rack, so often times, centering the Segment on its corresponding Aisle Path is easiest. This can be accomplished by using Orientation = Left, Width = 4, and Offset = -2.
When making segments in an aisle with a cross aisle in the middle, the inset should be based off the starting X,Y coordinate. For example, the racks are laid out going west to east and there is a cross aisle in the middle going south to north. The left portion will have an inset of 1 from the starting X,Y coordinate but the right portion should have an inset of the starting X to the cross aisle plus 1.

To View Segments in ProTrack Warehouse:

Access the Facility Layout screen, and click .
Select the facility name from the Facility list and floor name from the Floor list and click . The selected floor will be displayed.
Select a segment to view the Segment Properties.

^{Fig.216 Facility Layout Viewer - Segments}

Locations & Levels

A Location is any point in the warehouse to which you want to calculate travel to or from. For example, locations may be product slot locations, product staging areas, dock doors, order pickup / drop-off locations, or conveyor drop points. Levels are optional, and represent the various heights (Z coordinate) within a particular location. Thus, levels are associated with specific locations, and so the two are imported together. All Locations must be present inside a Segment.

Please refer to the Location tab of the current “SOP for XYZ Importing” Excel spreadsheet.

Location ID	Location Name	X	Y	Floor ID	Segment ID
1-loc1	1-loc1	4205	2800	FLR1	1-FLR1-100-A
1-loc2	1-loc2	4220	2800	FLR1	1-FLR1-104-A
1-loc3	1-loc3	4200	2900	FLR1	1-FLR1-104a-A

^{Table 46. Location Examples}

Field	Description
Name & ID	Must match.
X	X co-ordinate of the location.
Y	Y co-ordinate of the location.
Floor ID	Must match the Floor ID that is configured in ProTrack Warehouse.
Level Specifier	This is the To Location Level ID. Must match exactly what is being sent in the WMS extraction file. Each Level Specifier is separated by the pipe symbol .
Level Height	This is the distance from the floor in inches for vertical travel. Must match exactly what is being sent in the WMS extraction file. Each Level Height is separated by the pipe symbol .

^{Table 47. Location Field Descriptions}

Info

There must be the same number of Level Specifiers as corresponding Level Heights.
Be aware which direction locations will ascend/descend within an aisle on the floor and enter that same direction into the XYZs.

To view Locations in ProTrack Warehouse:

Access the Facility Layout screen, and click .
Select the facility name from the Facility list and floor name from the Floor list and click . The selected floor will be displayed.
Select a location to view the Location Properties.

^{Fig.217 Facility Layout Viewer - Locations}

Child pages

XYZ Components

Floor

Aisle Paths

Travel Paths

Nodes

Segments

Locations & Levels