Versions Compared

Old Version 27

changes.mady.by.user Angelica Domingo

Saved on

compared with

New Version 28

changes.mady.by.user Angelica Domingo

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

The kiosk can be used to capture time stamps of different activities within a facility that cannot be tracked from a WMS perspective (i.e. RF scanning).

The kiosk can track:

  • Standard Direct activities
  • Indirect activities
  • Delays

Column
Column
width5%

 

Column
Info
titleInfo

Delays can be configured to require supervisor approval and will not be applied to the employee's day until they have been approved.

Column
width20%

 

By tracking all the activities that occur within the facility, you will have a better idea as to where all the hours are going and from there figure out if those hours are truly necessary.

Anchor
kiosk login
kiosk login
Accessing the Kiosk

  1. Log into ProTrack Warehouse using a kiosk account.

  2. Select Warehouse from the Kiosk drop down menu.



    FieldDescription
    Standard ActivityAllows the user to create a standard direct assignment through the kiosk.
    Indirect ActivityAllows the user to create an indirect assignment through the kiosk.
    DelayAllows the user to add delays that have been encountered in their day.
    GroupAllows the user to group multiple assignments together into one assignment.
    ResetClears the kiosk and logs off the user.
    End AllEnds all assignment(s) that are in progress and on-hold.
Column
Panel

On this page:

 

Related topics:

 

 

Anchor
kiosk start
kiosk start

 

Starting an Assignment

There are three different types of standard direct assignments that can be worked using the kiosk.

  • Pre-downloaded (aka PRE) – un-worked WMS assignments that contain case, pallet, or quantity counts which were imported via flat file
  • OPS – assignments created in advance via the KVI Entry screen
  • Manual – assignments created directly from the kiosk

To begin a PRE assignment:Kiosk PRE assignment

  1. Enter or scan the employee ID.
    1. If authentication is enabled, a popup window will appear asking for the user's ProTrack password.
  2. Enter or scan the barcode of the assignment into the Activity/Assignment field.
  3. Navigate the cursor out of the Activity/Assignment field by clicking [Tab] to begin the assignment.
    1. If barcode of the assignment was scanned, the cursor should automatically navigate out of the field.



 

To begin an OPS assignment:Kiosk OPS assignment

  1. Enter or scan the employee ID.
    1. If authentication is enabled, a popup window will appear asking for the user's ProTrack password.
  2. Enter the exact assignment ID that was created from the KVI Entry screen.
  3. Navigate the cursor out of the Activity/Assignment field by clicking [Tab] to begin the assignment.

 

 

To begin a MANUAL assignment:

  1. Enter or scan the employee ID.
    1. If authentication is enabled, a popup window will appear asking for the user's ProTrack password.

 

Column
Note
  • If an assignment is currently In-Progress, starting a new assignment from the kiosk will simultaneously end the assignment In-Progress. The end time for the first assignment will be recorded as the start time of the new assignment.
  • Refresh timer displays the amount of time before the user is automatically logged off from the kiosk. The duration of the timer can be configured from the System Configuration screen.
    • There are two timers that are configurable:
      • KIO_REFRESH_SEC – timer displayed when the user first logs into the kiosk
      • KIO_REFRESH2_SEC – timer displayed after the user starts an assignment from the kiosk
  • Productivity & Utilization gauges can be enabled/disabled from the Employee screen.

Anchor
kiosk hold resume
kiosk hold resume

Anchor
kiosk end
kiosk end

Anchor
kiosk group
kiosk group

Anchor
kiosk split
kiosk split

Anchor
kiosk manual
kiosk manual

Anchor
kiosk indirect
kiosk indirect

Anchor
kiosk delay
kiosk delay

Anchor
kiosk logoff
kiosk logoff