Page History
...
- Enter an Equipment Type Name, which can be alphanumeric.
Enter a unique Equipment Type ID, which can be alphanumeric.
Fig.2 Maintain Equipment - Adding New EquipmentMaintain Equipment Field Descriptions
Field
Description
Equipment Type Name
Type the equipment name, which can be alphanumeric.
Equipment Type ID
Type a unique equipment ID, which can be alphanumeric.
Equipment Make
Type the details of the manufacturer.
Manufacture Date
Select the date of manufacture.
Equipment Model
Type the description for equipment model.
Initial Cost
Enter the cost of the equipment in USD.
Schedule Maintenance
Select a date for servicing.
Notes
Type any additional information, if any.
Table 2. Maintain Equipment Field Descriptions
Info title Info - Fields that are in bold are mandatory, all other fields are optional.
- Click to enter dates for the Manufacture Date and Schedule Maintenance.
- The Equipment ID must match what is being sent in the WMS file.
Click on the 'Speed Break' tab.
Fig.3 Maintain Equipment - Speed BreakTo set a default horizontal and vertical speeds, enter the speeds in each field accordingly.
Fig.4 Maintain Equipment - Default Speed BreaksInfo title Info - If default speed breaks are entered then you cannot enter multiple speed breaks and the 'Add Speed' links are unavailable.
- All Vertical speeds must be in minutes per inch and Horizontal speeds must be in minutes per foot.
To set multiple horizontal and vertical speed breaks, click the 'Add Speed' link in the 'Vertical Speed' section of the table. 'Add Vertical Distance' popup appears.
Fig.5 Maintain Equipment - Add Speed
Fig.6 Maintain Equipment - Add Vertical Distance- Type the Upper Distance and Vertical Speed. Click to add the speed break.
Repeat until all speed breaks have been entered.
Info title Info - Lower Distance will be greyed out as it uses the upper distance from the previous vertical speed break. This is done to avoid any overlapping of the speed breaks.
- Always enter the Upper Distance greater than the Lower Distance.
Fig.7 Maintain Equipment - Vertical Speed Breaks- Click the 'Add Speed' link in the 'Horizontal Speed' section of the table. 'Add Horiztonal Distance' popup appears.
- Type the Upper Distance and Horizontal Speed. Click to add the speed break.
Repeat until all speed breaks have been entered.
Fig.8 Maintain Equipment - Horizontal Speed BreaksClick on the 'Threshold' tab to set thresholds to the equipment type. Thresholds are used to trigger a re-trip within an assignment.
Fig.9 Maintain Equipment - Threshold- Type threshold values for Lines, Units, Weight, and/or Volume. The re-trip will be triggered based on which criteria is fulfilled first.
- Click and the equipment will be created.
...