...
| Tip |
|---|
|
- Segments cannot intersect a node.
- Segment orientation must follow the format Left or Right, using all uppercase letters or any other format in the import file will result in the segment not properly configured.
- Locations must reside within the coordinates that the Segment occupies. Travel is not calculated from the center of the aisle to the front of the rack, so often times, centering the Segment on its corresponding Aisle Path is easiest. This can be accomplished by using Orientation = Left, Width = 4, and Offset = -2.
- When making segments in an aisle with a cross aisle in the middle, the inset should be based off the starting X,Y coordinate. For example, the racks are laid out going west to east and there is a cross aisle in the middle going south to north. The left portion will have an inset of 1 from the starting X,Y coordinate but the right portion should have an inset of the starting X to the cross aisle plus 1.
|
...
Table 11. Location Field Descriptions
| Info |
|---|
|
- X, Y coordinates are entered in feet.
- There must be the same number of Level Specifiers as corresponding Level Heights.
- Be aware which direction locations will ascend/descend within an aisle on the floor and enter that same direction into the XYZs.
|
...
