...
| Tip |
|---|
|
- Aisle Path name and ID are recommended to be the same.
- Aisle Paths 1-FLR1-104 and 1-FLR1-104a should be two Aisle Paths as they are divided by a non-passable fence, even though they are both vertical Aisle Paths with the same X coordinates.
- Aisle Paths must be configured at 90-degree angles. Two aisle paths cannot converge at a single point and both be horizontal or both be vertical. In these cases, the two should just be treated as one Aisle Path.
- Aisle Paths cannot be built on the edge of a Floor, so make sure the Floor is larger than the location of the Aisle Paths.
|
...
To view Aisle Paths in ProTrack Warehouse:
- Access the Facility Layout screen, and click
Image Added. - Select the facility name from the Facility list and floor name from the Floor list and click
Image Added. The selected floor will be displayed. - Select an aisle path to view the Aisle Path Properties.
| image |
|---|
| image | MFL AP Prop.jpg |
|---|
| title | Fig.190 Facility Layout Viewer - Aisle Path |
|---|
|
|
Travel Paths
