Page History

...

Access the Facility Layout screen, and click .
Select the facility name from the Facility list and floor name from the Floor list and click . The selected floor will be displayed.

image
image MFL Floor.jpg
title Fig.189 211 Facility Layout Viewer - Floor

...

Access the Facility Layout screen, and click .
Select the facility name from the Facility list and floor name from the Floor list and click . The selected floor will be displayed.
Select an aisle path to view the Aisle Path Properties.

image
image MFL AP Prop.jpg
title Fig.190 212 Facility Layout Viewer - Aisle Path

...

Access the Facility Layout screen, and click .
Select the facility name from the Facility list and floor name from the Floor list and click . The selected floor will be displayed.
A Travel Path is displayed as a larger grey circle overlapping a node.

image
image MFL TP Node.jpg
title Fig.191 213 Facility Layout Viewer - Travel Path

...

Access the Facility Layout screen, and click .
Select the facility name from the Facility list and floor name from the Floor list and click . The selected floor will be displayed.
Click on the Floor and the Floor Properties screen will display.
Click on the properties screen.
Nodes will be generated and displayed on the floor.
Click .
Click .
Repeat for all Floors.

image
image MFL Gen Nodes.jpg
title Fig.192 214 Facility Layout Viewer - Nodes

...

image

image	Orientation.jpg
title	Fig.193 215 Segment Orientations

Tip

title	Tips

Segments cannot intersect a node.
Locations must reside within the coordinates that the Segment occupies. Travel is not calculated from the center of the aisle to the front of the rack, so often times, centering the Segment on its corresponding Aisle Path is easiest. This can be accomplished by using Orientation = Left, Width = 4, and Offset = -2.
When making segments in an aisle with a cross aisle in the middle, the inset should be based off the starting X,Y coordinate. For example, the racks are laid out going west to east and there is a cross aisle in the middle going south to north. The left portion will have an inset of 1 from the starting X,Y coordinate but the right portion should have an inset of the starting X to the cross aisle plus 1.

...

Access the Facility Layout screen, and click .
Select the facility name from the Facility list and floor name from the Floor list and click . The selected floor will be displayed.
Select a segment to view the Segment Properties.

image
image MFL Segment.jpg
title Fig.194 216 Facility Layout Viewer - Segments

...

Access the Facility Layout screen, and click .
Select the facility name from the Facility list and floor name from the Floor list and click . The selected floor will be displayed.
Select a location to view the Location Properties.

image
image MFL Loc.jpg
title Fig.195 217 Facility Layout Viewer - Locations

Site Navigation