Page History

Maintain Alerts in ProTrack Warehouse is used to setup alerts and alert parameters for pre-determined recipients. Maintain Alert is also used to set up a list of subscribers and their email addresses.

To access the Maintain Alerts screen:

1. Log in to ProTrack Warehouse.

2. Select Alert under the Configuration menu. The Maintain Alerts screen appears.
   
   
   ^{Fig.1 Maintain Alerts}

    

   Maintain Alerts Tab Descriptions

   Tab	Description
   Monitor Plan	Displays alert plan details and entities that are monitored by that plan.
   Alert Levels	Displays details of different alert criteria like performance, utilization, effectiveness, and quality.
   Subscribers	Displays shows subscriber details to send alerts to either through the screen or through an e-mail.

   ^{Table 1. Maintain Alerts Tab Descriptions}
   
   Maintain Alerts Field Descriptions

   Field	Description
   Alert Plan	Type a plan name, which is alphanumeric (combination of Alphabets and Numbers).
   Monitor Level	Select the Alert Monitoring level. Currently individual is the only option.
   Response Time	Type the Hours or Minutes given to a subscriber to respond to an alert.
   Reminder Time	Type the reminder time.
   Start Date	Click and select the Start Date of the alert plan, which should be earlier than End Date.
   End Date	Click to select the End Date of the alert plan.
   Use Reminder	If Use Reminder check box is selected, type the Reminder Time.
   Disable Alert	Click ‘Yes’ to disable the alert, if not click ‘No’.

   ^{Table 2. Maintain Alerts Field Descriptions}

Adding Alerts

To add a new alert:

1. Type the Plan Name.
2. Select 'Individual' for the Monitor Level of the alert.

3. Click Employee List link, the Search Employee screen appears. The employee details appear in the ‘Search Results’ section of the Search Employee pop-up.
   
   
   <sup>Fig.2 Maintain Alerts - Search Employees
   
   
    Fig.3 Maintain Alerts - Search Employees</sup>

    

   Tip
   title Tip
   To list the Employees with first names starting with a particular character, enter the character into the field. For example, to search the employees starting with the character 'P', enter 'P' in the first name field to list employees with first names starting with P.

4. Select the check box of each employee that will be monitored from the list.
   
   
   ^{Fig.4 Maintain Alerts - Select Employees}

    

5. Click  and the selected employees will populate in the 'Employee List' section.

6. Click on the 'Alert Level' tab.
   
   
   ^{Fig.5 Maintain Alerts - Alert Level}

    

   Alert Level Field Descriptions

   Field	Description
   Performance Alert Lower Limit	Indicates the acceptable lower level of normal performance that is being monitored.
   Performance Alert Upper Limit	Indicates the upper level of normal performance that is being monitored.
   Performance Critical Lower Limit	Indicates the acceptable lower level of critical performance that is being monitored.
   Performance Critical Upper Limit	Indicates the upper level of critical performance that is being monitored.
   Utilization Alert Lower Limit	Indicates the acceptable lower level of utilization that is being monitored.
   Utilization Critical Lower Limit	Indicates the acceptable critical lower level of utilization that is being monitored.
   Effectiveness Alert Lower Limit	Indicates the acceptable normal lower level of effectiveness that is being monitored.
   Effectiveness Critical Lower Limit	Indicates the acceptable critical lower level of effectiveness that is being monitored.
   Message	Type a corresponding message for any of the criteria (Performance, Utilization, and Effectiveness) depending on the Normal or Critical Limit.

   ^{Table 3. Alert Level Field Descriptions}
   
   Quality Threshold Field Descriptions

   Field	Description
   No. Of Errors - Alert Normal Limit	Indicates the acceptable number of errors for normal level for the given Unit Of Measure (UOM).
   No. Of Errors - Critical Limit	Indicates the acceptable number of errors for critical level for the given UOM.
   % Of Errors - Alert Normal Limit	Indicates the acceptable percentage of errors for normal level for the given UOM.
   % Of Errors - Critical Limit	Indicates the acceptable percentage of errors for critical level for the given UOM.
   UOM	Unit Of Measure (Cases, Lines, Pallets, Units).
   Message	Type a corresponding message for the criteria (No. of Errors or % of Errors) depending on the Normal or Critical Limit.

   ^{Table 4. Quality Threshold Field Descriptions}
   
   

7. To specify alert levels of the selected entities, type the relevant fields under the sections: Performance, Utilization, Effectiveness, and Quality Threshold (Total Errors or Use % of Errors).

8. Click the 'Subscriber' tab to select subscribers of the alert plan.
   
   
   ^{Fig.6 Maintain Alerts - Subscriber}

    

9. Click the 'Select Subscriber' link and the Search Employee screen appears.
   
   
   ^{Fig.7 Maintain Alerts - Select Subscribers}

    

10. Select the check boxes next to the employees to add them as a subscriber.

11. Click  and the employees will be listed in the Maintain Alerts screen.
    
    
    ^{Fig.8 Maintain Alerts - Subscribers}

     

12. Click  to save the plan.

    Info
    title Info
    To delete a subscriber select the corresponding check boxes and click .

Searching Alerts

To search for particular plans:

1. Click  in the Maintain Alerts screen and the Search Alerts screen appears.
   
   
   ^{Fig.9 Maintain Alerts - Search Alerts}

    

2. Type the Monitor Plan or select the Alert Level from the drop down list.

3. Click  and the records for the selected criteria will be listed in the 'Alert Search Results' section.

   Tip
   title Tips
   To list Plans with names starting with a particular character, enter the character into the field. For example, to search plans starting with the character 'C', enter 'C' in the Monitor Plan to list plans with names starting with C. If no search criteria are specified all the plans will be listed in the 'Alert Search Results' section.

Viewing & Editing Alert Plans

To view and edit the plan:

1. Search and list the alert plans you want to view or edit in the ‘Alert Search Results’ section.
2. Click the Alert Plan link from the ‘Alert Search Results’ section. The details of the plan appear in the corresponding fields in the Maintain Alerts screen.

3. Change the required fields and click  to save the changes.

   Tip
   title Tips
   If you have made the changes in the fields and do not want to save the details, click before you save the changes. If you want to add an alert plan at this point, click to clear the fields and to bring the screen to add mode. To delete a subscriber select the corresponding check boxes and click .

Deleting Alert Plans

To delete the plans:

1. Search and list plans in the ‘Alert Search Results’ section.

2. Select the Alert Plans in the ‘Alert Search Results’ section by selecting the check box of each plan.

   image
   image MA Delete.jpg title Fig.261 Maintain Alerts - Delete Plan

3. Click  and the selected plans are deleted.