Page History

...

Location Data Element Naming Conventions – It is recommended that the following naming conventions be followed to so that the user easily knows where the data element is located on the Facility Layout.

Data Element	Naming Convention	Naming Convention Example	Comment
Facility	FAC	DC1	Facility ID must match EXACTLY what is configured in ProTrack Warehouse and being sent in the WMS extraction file.
Floor	FAC-FLR	DC1-FLR1
Aisle Path	FAC-FLR-AISLE	DC1-FLR1-04A	When two or more Aisle Paths are needed for a single rack (i.e. due to a non-passable barriers such as a security cage fence), append lowercase letters to the AISLE element.
Segment	FAC-FLR-AISLE-1	DC1-FLR1-04A-1	The ‘-1’ suffix increments (‘-2’, ‘-3’, etc.) with additional Segments on a single Aisle Path.
Location	FAC-LOC	DC1-032457	Must match the ‘To Location’ field EXACTLY being sent in the WMS extraction file.
Travel Path	FAC-FLR1-FLR2-1	DC1-FLR1-FLR2-1

^{Table 1. Naming Conventions}

...

Please refer to the Floor tab of the current “SOP for XYZ Importing” Excel spreadsheet.

Floor ID	Floor Name	Description	Start X	Start Y	End X	End Y	Width	Facility ID
1-FLR1	1-FLR1	Chicago - First floor	4000	2500	8000	5000	4000	1
2-FLR1	2-FLR1	Joliet - First floor	2000	2000	6600	5000	4600	2

^{Table 2. Floor Example}

Info

title	Info

Commas ( , ) are not allowed in description fields for any .csv import file, as ProTrack Warehouse will treat the comma as a field separator and the file will error out.

Field	Description
Floor Name	Name of the floor.
Start X	X value of the start co-ordinate of the floor.
Start Y	Y value of the start co-ordinate of the floor.
End X	X value of the end co-ordinate of the floor. This value should be equal to start X.
End Y	Y value of the end co-ordinate of the floor.
Height	This is for future development, and thus not currently available in this version of *ProTrack* Warehouse**.
Width	Width of the floor.
Description	Description of the floor.

^{Table 3. Floor Field Descriptions}

...

Please refer to the Aisle Path tab of the current “SOP for XYZ Importing” Excel spreadsheet.

Aisle Path ID	Aisle Path Name	Start X	Start Y	End X	End Y	Floor ID	Bay Number Direction	Bay Number Scheme	Aisle Access Rule	Path Travel Rule
1-FLR1-100	1-FLR1-100	4200	2800	4300	2800	1-FLR1	ALT_LR_ES	DUB_INC	DIRECT	BD
1-FLR1-101	1-FLR1-101	4200	3000	4300	3000	1-FLR1	ALT_LR_ES	DUB_INC	DIRECT	BD
1-FLR1-102	1-FLR1-102	4200	2800	4200	3000	1-FLR1	ALT_LR_ES	DUB_INC	DIRECT	ONE_WAY
1-FLR1-103	1-FLR1-103	4250	2800	4250	3000	1-FLR1	ALT_LR_ES	DUB_INC	DIRECT	ONE_WAY
1-FLR1-104	1-FLR1-104	4300	2800	4300	2900	1-FLR1	ALT_LR_ES	DUB_INC	DIRECT	BD
1-FLR1-104a	1-FLR1-104a	4300	2910	4300	3000	1-FLR1	ALT_LR_ES	DUB_INC	DIRECT	BD

^{Table 4. Aisle Path Examples}

Field	Description
Aisle Path ID	ID of the aisle path.
Aisle Path Name	Name of the aisle path.
Start X	X value of the start co-ordinate of the aisle path.
Start Y	Y value of the start co-ordinate of the aisle path.
End X	X value of the end co-ordinate of the aisle path.
End Y	Y value of the end co-ordinate of the aisle path.
Bay Number Direction	This is for future development, and thus not currently available in this version of ProTrack Warehouse. This is a mandatory field, so populate with the default value from the table above.
Bay Number Scheme	This is for future development, and thus not currently available in this version of ProTrack Warehouse. This is a mandatory field, so populate with the default value from the table above.
Aisle Access Rule	This is for future development, and thus not currently available in this version of ProTrack Warehouse. This is a mandatory field, so populate with the default value from the table above.
Path Travel Rule	Denotes whether the aisle can be traveled in both directions (BD), one direction (ONE_WAY), or one direction starting from the endpoint to the start point (ONE_WAY_ES)* *ONE_WAY_ES is useful for creating a one-way path in the opposite direction without needing to reimport all of the related segments and locations

^{Table 5. Aisle Path Field Descriptions}

...

Access the Facility Layout screen, and click .
Select the facility name from the Facility list and floor name from the Floor list. The selected floor will be displayed.
Select an aisle path to view the Aisle Path Properties.

^{Fig.5 Facility Layout Viewer - Aisle Path}

A One-Way Aisle Path will be denoted by an Arrow on the aisle path. Equipment marked "One Way" will only be able to travel in the specified direction.

Image Added
^{Fig.6 Facility Layout Viewer - Aisle Path, One Way}

An Aisle Path with an Equipment Access Rule will be denoted by an orange color. Only equipment with the specified access rule will be able to utilize that aisle path.

^{Image Added}

^{Fig.7 Facility Layout Viewer - Aisle Path, Equipment Access Rule}

Anchor

	TP
	TP

Travel Paths

A Travel Path is a connection between two different floors. In the actual warehouse, this may be at a staircase, an elevator, or just any point where two floors connect. Travel paths are similar to Aisle Paths in that they are lines over which travel is calculated, but their sole purpose is to connect two floors. Travel Paths start at one node on a starting floor and end at another node on the ending floor.

Please refer to the Travel Path tab of the current “SOP for XYZ Importing” Excel spreadsheet.

travel_id	travel_name	description	start_X	start_Y	end_X	end_Y	end_ floor_id	begin_floor_id	barrier	path_access_rule
DC1-1-2-A	DC1-1-2-A	south stairs	1005	2050	1006	2050	FLR2	FLR1	N	BD
DC1-1-2-B	DC1-1-2-B	east stairs	1500	1910	1500	1911	FLR2	FLR1	N	BD
DC1-2-3-A	DC1-2-3-A	service elev	1005	2050	1006	2050	FLR3	FLR2	N	BD

^{Table 6. Travel Path Examples}

Field	Description
Travel Path ID	ID of the Travel Path.
Travel Path Name	Name of the Travel Path.
Description	Description of the Travel Path.
Start X	X value of the start coordinate of the Travel Path.
Start Y	Y value of the start co-ordinate of the Travel Path.
End X	X value of the end co-ordinate of the Travel Path.
End Y	Y value of the end co-ordinate of the Travel Path.
End Floor Id	Floor ID corresponding to the node at the X,Y coordinate specified in the End X and End Y fields.
Begin Floor Id	Floor ID corresponding to the node at the X,Y coordinate specified in the Start X and Start Y fields.
Barrier	This is for future development, and thus not currently available in this version of ProTrack Warehouse. This is a mandatory field, so populate with the default value from the table above.
Path Access Rule	This is for future development, and thus not currently available in this version of ProTrack Warehouse. This is a mandatory field, so populate with the default value from the table above.
Width	This is for future development, and thus not currently available in this version of ProTrack Warehouse. This is a mandatory field, so populate with the default value from the table above.

^{Table 7. Travel Path Field Descriptions}

...

Access the Facility Layout screen, and click .
Select the facility name from the Facility list and floor name from the Floor list. The selected floor will be displayed.
A Travel Path is displayed as a larger grey circle overlapping a node.

^{Fig.6 8 Facility Layout Viewer - Travel Path}

...

Access the Facility Layout screen, and click .
Select the facility name from the Facility list and floor name from the Floor list. The selected floor will be displayed.
Click on the properties screen.
Nodes will be generated and displayed on the floor.
Click .
Repeat for all Floors.

^{Fig.7 9 Facility Layout Viewer - Nodes}

...

Please refer to the Segment tab of the current “SOP for XYZ Importing” Excel spreadsheet.

Segment ID	Segment Name	Inset	Offset	Length	Width	Orientation	Number_Scheme	Number_Direction	Aisle_ID	Floor_ID
1-FLR1-100-A	1-FLR1-100-A	1	-2	98	4	Left	DUB_INC	ALT_LR_ES	1-FLR1-100	FLR1
1-FLR1-104-A	1-FLR1-104-A	1	-2	98	4	Left	DUB_INC	ALT_LR_ES	1-FLR1-104	FLR1
1-FLR1-104a-A	1-FLR1-104a-A	111	-2	88	4	Left	DUB_INC	ALT_LR_ES	1-FLR1-104a	FLR1

^{Table 8. Segment Examples}

Field	Description
Segment ID	ID of the segment.
Segment Name	Name of the segment.
Aisle Name	Name of the aisle path to which the segment is associated.
Inset	Distance from the aisle starting point to the segment.
Offset	Distance from aisle axis to the segment.
Width	Width of the segment.
Length	Length of the segment.
Numbering Scheme	This is for future development, and thus not currently available in this version of ProTrack Warehouse. This is a mandatory field, so populate with the default value from the table above.
Numbering Direction	This is for future development, and thus not currently available in this version of ProTrack Warehouse. This is a mandatory field, so populate with the default value in from the table above.
Start Bay Number	This is for future development, and thus not currently available in this version of ProTrack Warehouse. This is a mandatory field, so populate with the default value from the table above.
Number of Bays	This is for future development, and thus not currently available in this version of ProTrack Warehouse. This is a mandatory field, so populate with the default value from the table above.
Orientation	Orientation of the Segment as it relates to the Aisle Path. This will determine which direction will be positive and negative when setting the width of the segment. Orientation of Left will have positive distances to the left of the aisle and negative distances to the right of the aisle. Orientation of Right will have positive distances to the right of the aisle and negative distances to the left of the aisle.
Description	Description of the segment.

^{Table 9. Segment Field Descriptions}

In the example illustrations that follow, the blue shaded area is the segment. Each cell is 2’ by 2’, so the width of the segment is 4’.

Image Modified
^Fig.

...

^{10 Segment Orientations}

Tip

title	Tips

Segments cannot intersect a node.
Segment orientation must follow the format Left or Right, using all uppercase letters or any other format in the import file will result in the segment not properly configured.
Locations must reside within the coordinates that the Segment occupies. Travel is not calculated from the center of the aisle to the front of the rack, so often times, centering the Segment on its corresponding Aisle Path is easiest. This can be accomplished by using Orientation = Left, Width = 4, and Offset = -2.
When making segments in an aisle with a cross aisle in the middle, the inset should be based off the starting X,Y coordinate. For example, the racks are laid out going west to east and there is a cross aisle in the middle going south to north. The left portion will have an inset of 1 from the starting X,Y coordinate but the right portion should have an inset of the starting X to the cross aisle plus 1.

...

Access the Facility Layout screen, and click .
Select the facility name from the Facility list and floor name from the Floor list. The selected floor will be displayed.
Select a segment to view the Segment Properties.

^{Fig.9 11 Facility Layout Viewer - Segments}

...

Please refer to the Location tab of the current “SOP for XYZ Importing” Excel spreadsheet.

Location ID	Location Name	X	Y	Floor ID	Segment ID	Level Specifier	Level Height
1-loc1	1-loc1	4205	2800	FLR1	1-FLR1-100-A	Image Modified	Image Modified
1-loc2	1-loc2	4220	2800	FLR1	1-FLR1-104-A	Image Modified	Image Modified
1-loc3	1-loc3	4200	2900	FLR1	1-FLR1-104a-A	Image Modified	Image Modified

^{Table 10. Location Examples}

Field	Description
Name & ID	Must match.
X	X co-ordinate of the location.
Y	Y co-ordinate of the location.
Floor ID	Must match the Floor ID that is configured in ProTrack Warehouse.
Level Specifier	This is the To Location Level ID. Must match exactly what is being sent in the WMS extraction file. Each Level Specifier is separated by the pipe symbol _{Image Modified}.
Level Height	This is the distance from the floor in inches for vertical travel. Must match exactly what is being sent in the WMS extraction file. Each Level Height is separated by the pipe symbol _{Image Modified}.

^{Table 11. Location Field Descriptions}

...

Access the Facility Layout screen, and click .
Select the facility name from the Facility list and floor name from the Floor list. The selected floor will be displayed.
Select a location to view the Location Properties.

^{Fig.10 12 Facility Layout Viewer - Locations}

Page tree

Versions Compared

Old Version 3

New Version 4

Key

Travel Paths