Page History

Determinants in ProTrack Warehouse are triggerable contributers to an overall standard time.

To access the Maintain Determinant screen:

1. Log in to ProTrack Warehouse.

2. Select Determinant under the Standards menu. The Determinant screen appears.
   
   
   ^{Fig.1 Determinant}

    

   Determinant Tab Descriptions

   Tab	Descriptions
   Determinant Info	Displays the details of the determinant.
   Condition	Dipslys the conditions associated with the selected determinant.

   ^{Table 1. Determinant Tab Descriptions}
   
   Determinant Field Descriptions

   Field	Descriptions
   Determinant Name	Displays the name of the determinant.
   Constant Standard Value	This field is currently not supported and reserved for future development.
   Maximum Allowable Key-In Units	Maximum accepted value for determinants that require a manual KVI entry through the KVI entry screen or WMS update file.
   Determinant Description	Displays details pertaining to the determinant.
   Start Location	Used to hard code a starting location for a standard.
   End Location	Used to hard code an ending location for a standard.
   Drop Location	Used to hard code a drop location when re-trips are necessary in an activity.
   Determinant Level	Signifies the level of the determinant, either Assignment or Task.
   Apply Handling Time	Determines whether handling time will be applied with the determinant.
   Handling Matrix	Specifies which handling matrix will be used when handling time is enabled.
   Determinant Type	Signifies the determinant type, either Travel or Work.
   Work Time Function	Value that will be applied when the determinant is triggered.

   ^{Table 2. Determinant Field Descriptions}

...

• Only apply once per assignment, unconditionally (cannot have conditions).
• May be configured as either a Travel or Work determinant.
• Work Time Function may NOT include a field (variable), as assignment level determinants are not associated with a particular task line. The Work Time Function field does support functions of constants only (for example, 1.45 * 2).
  
  Task Level Determinants:
   
• Task Level will try to apply at each task line within an assignment based on the conditions.
• May only be configured as a Work determinant.

• Require at least one condition (even if that condition will always be true).

  Info
  title Info
  Number of Task Level Determinants and Conditions has a direct impact on the overall performance (data throughput) of ProTrack Warehouse. Care needs to be taken to build only the determinants that are required to drive the granularity of Standard required for the activity. Assignment and Task Level Determinants are required for each Standard.

1. Click to apply or not apply Additional Handling.
2. From the drop-down list, select a Handling Matrix Name that was set-up in Handling Time.

3. Click one of the Determinant Type options to set the determinant type to either Travel or Work.
   
   

   Info
   title Info
   Travel Determinants cannot be set to apply based on a specific set of conditions. These are used to hard-code a specific assignment Start, End, and Drop locations. Travel Determinants must be configured as Assignment Level.

4. If Determinant Type is set to Travel, specify the Start Location, End Location and Drop Location from their respective lists.
5. To specify the standard time for this determinant, enter a function into the Work Time Function text box. The function entered may be a simple constant value, or an algebraic expression.

   1. For expressions, you can use fields as variables. Click 'Insert a Field' link and a popup screen appears. Click a WMS Import field link, which is then populated in the Work Time Function field.
      
      
      ^{Fig.2 Determinant - Work Time Function}

       

      Info
      title Info
      While saving, the system validates the work time function. When Work Time Function is defined it is necessary to list the fields within double quotations “ “, without which the formula will not be valid. The expression may be built using addition,subtraction, division, or multiplication operators: + - / * Also, parentheses may be used to specify order of operations: ( ). The total length of the work time function cannot exceed 80 characters. The formula can be an expression much like that used in Excel. Example: (“Quantity” * “Unit Weight”) * .0006 The formulas can generate a negative number if time needs to be reduced due to a specific task not being preformed on this specific assignment. Example: “Quantity” * -1.234 Total standard time for one assignment is 35,791 minutes (assume employee works eight-hour day this would allow 74 employees to work the same assignment). ProTrack Warehouse stores STD time in milliseconds and the max integer field in SQL Server 2005 is 2,147,483,647.

6. To add a condition to a determinant, click the 'Condition' tab. the screen appears with the Select Condition link and a blank ‘condition’ list.
   
   
   ^{Fig.3 Determinant - Conditions}

    

7. You can add the determinant conditions by clicking 'Select Condition' link.
   
   
   ^{Fig.4 Determinant - Selecting Conditions}

    

8. Select the check box of the individual Field Name.
   
   
   ^{Fig.5 Determinant - Selecting Fields}

    

9. Click  and the selected fields will be listed in the ‘Conditions’ list section of the Determinants screen.
   
   
   ^{Fig.6 Determinant - Conditions}

    

10. You can change the Condition Type for each Determinant Condition by selecting from the list.

...