Page History

Remove.jpgControl Screen provides the supervisors and managers the visibility to assign work, whether it be standard direct, indirect, and/or delay activities, and maintain employees on a single screen. This screen will also allow the supervisors and managers to add Delays that employees encounter as well as any indirect tasks.

To access the Control Screen:

...

1. Click  to expand the kiosk that will be used.
   
   
   _{Fig.2 Expanded Control Screen - Expanding Kiosk}
   
   
2. Enter the Assignment ID into the Work Order field and then move the cursor out of the field. 
   1. If the Assignment ID exists (PRE-downloaded), then the assignment can be started right away.
   2. If the Assignment ID does not exist, then the activity must be selected as well as some a popup will appear where the configurable reporting fields (i.e. wave #, batch #, etc.) must be filled in and the activity must be selected from the drop down list.
      
      Image Added
      ^{Fig.3 Control Screen - Starting A Work Order}
      
      

Adding Employees To Standard Direct Activity

1. Once the work order is ready (status will be in AVL, available), select and drag employee(s) from the right side of the screen into the Standard Direct section of the work order.

2. If needed, use the search option within the Unassigned section to narrow the list of employees to a specific group.
   
   Image Added
   ^{Fig.4 Control Screen - Unassigned Employee Search}

   Field	Description
   Team	Lists all teams (grouping of employees) that have been created from the Team Config screen.
   Work Order	Entering a work order will list all employee(s) that are working or have worked that order.
   Employee	Enter search criteria to narrow the list of employees.

3. To move multiple employees at once, click the names of the individuals in the Search Results section and then drag into the standard direct section.
   
   Image Added
   ^{Fig.5 Control Screen - Selecting Multiple Employees}
   
   
4. Once the employees have been dragged into the standard direct section, an assignment ID will be auto generated for each individual. Each assignment ID will have an appended " -#", these are considered as child assignments. The status of the work order will turn to INP (in progress).
   
   Image Added
   ^{Fig.6 Control Screen - Adding Employees to Standard Direct}
    

Adding Employees To Indirect Activity

1. Select and drag employee(s) from the right side of the screen into the Indirect section of the work order and a popup will appear.
2. Select the indirect activity from the drop down list and click Select.
3. Assignment IDs will be auto generated for each employee and will begin with OTH.
   
   Image Added
   ^{Fig.7 Control Screen - Adding Employees to Indirect}
   
   

Removing An Employee From A Work Order

1. Expand the kiosk and search for the work order.
2. Search for the employee within the work order and click Image Added to the right of the assignment ID. 
3. The employee will be removed from the work order and placed back into the Unassigned section.

Moving An Employee From Standard Direct To Indirect

1. Expand the kiosk and search for the work order.
2. Search for the employee within the work order. 
3. Click and drag that employee's name from the Standard Direct section into the Indirect section.
   
   Image Added
   ^{Fig.8 Control Screen - Switching from STD to IND}
   
4. A popup will appear. Select the indirect activity from the drop down list that the employee will be performing and click Select.
   
   Image Added
   ^{Fig.9 Control Screen - Switching from STD to IND}
   
   
5.  An assignment ID beginning with OTH will be automatically generated and time is now being captured under that activity for that employee.

Re-Assigning Indirect Activity

1. Expand the kiosk and search for the work order.
2. Search for the employee(s) within the Indirect section. 
3. Select the check box to the left of each employee's name that the indirect activity will change for.
   
   Image Added
   ^{Fig.10 Control Screen - Switching from STD to IND}
    
4. Click _{Image Added} and a popup will appear. Select the indirect activity from the drop down list and click Select.
5. The employee(s) will be move from one indirect activity to the newly selected one and new assignment IDs will get auto generated. 
6. ProTrack Warehouse will end the previous indirect activity and begin the new indirect activity.

Moving An Employee From Indirect to Standard Direct

1. Expand the kiosk and search for the work order.
2. Search for the employee within the work order. 
3. Click and drag that employee's name from the Indirect section into the Standard Direct section.
   
   Image Added
   ^{Fig.11 Control Screen - Switching from IND to STD}
   
   
4. The employee will be moved into the Standard Direct activity and time will begin capturing under that activity.

Adding Delay To Work Order

1. Expand the kiosk and search for the work order.
2. Select the check box to the left of the employee's names that encountered the delay or the Select All check box.
3. Click _{Image Added} and a popup will appear.
   
   Image Added
   ^{Fig.12 Control Screen - Adding Delay}
   
   
4. Select the delay activity from the drop down list, when the delay began, and how long the delay lasted for.

5. Click Create and the delay will be created for each employee selected.
   
   

   Info
   title Info
   Once delay(s) have been created, they will not be displayed on the Control Screen. To view delay(s), click Image Added and a popup will appear displaying the employee's Daily Inquiry screen. Alternatively, delay(s) can be viewed from the Assignments Inquiry screen.

Adding Line Down

1. Expand the kiosk and search for the work order.
2. Click _{Image Added} and a popup appears.
   
   Image Added
   ^{Fig.13 Control Screen - Line Down}
   
   
3. Enter the Start and End Times of when the line down of the work order occurred.
4. Select the reason of the line down from the Delay Reason drop down list.
5. Click _{Image Added}. This will add a line down delay to the work order which can be used for reporting and tracking purposes.
6. Alternatively, line downs of a work order can be entered via the Line Down Entry screen.

Ending Work Order or Kiosk

1. Expand the kiosk and search for the work order.
2. Click _{Image Added} and all the assignment IDs under that work order, whether they are standard direct or indirect, will be ended with a time stamp of when the button was clicked.
3. Alternatively, the kiosk can be ended by clicking _{Image Added}. All open work order(s) will be ended with a time stamp of when the button was clicked.