Alerts

Maintain Alerts in ProTrack Warehouse is used to setup alerts and alert parameters for pre-determined recipients. Maintain Alert is also used to set up a list of subscribers and their email addresses.

To access the Maintain Alerts screen:

1. Log in to ProTrack Warehouse.
2. Select the Alerts tab under the Configuration menu. The Maintain Alerts screen appears.
   
   

   
   ^{Fig.231 Maintain Alerts}

   
   Maintain Alerts Tab Descriptions

   Tab	Description
   Monitor Plan	Displays alert plan details and entities that are monitored by that plan.
   Alert Levels	Displays details of different alert criteria like performance, utilization, effectiveness, and quality.
   Subscribers	Displays shows subscriber details to send alerts to either through the screen or through an e-mail.

   ^{Table 56. Maintain Alerts Tab Descriptions}
   Maintain Alerts Field Descriptions

   Field	Description
   Alert Plan	Type a plan name, which is alphanumeric (combination of Alphabets and Numbers).
   Monitor Level	Select the Alert Monitoring level. Currently individual is the only option.
   Response Time	Type the Hours or Minutes given to a subscriber to respond to an alert.
   Reminder Time	Type the reminder time.
   Start Date	Click and select the Start Date of the alert plan, which should be earlier than End Date.
   End Date	Click to select the End Date of the alert plan.
   Use Reminder	If Use Reminder check box is selected, type the Reminder Time.
   Disable Alert	Click 'Yes' to disable the alert, if not click 'No'.

   ^{Table 57. Maintain Alerts Field Descriptions}

Adding Alerts

To add a new alert:

1. Type the Plan Name.
2. Select 'Individual' for the Monitor Level of the alert.
3. Click Employee List link, the Search Employee screen appears. The employee details appear in the 'Search Results' section of the Search Employee pop-up.
   
   

   
   ^{Fig.232 Maintain Alerts - Search Employees}

   
   

   Tip

   • To list the Employees with first names starting with a particular character, enter the character into the field. For example, to search the employees starting with the character 'P', enter 'P' in the first name field to list employees with first names starting with P.
   
   
4. Select the check box of each employee that will be monitored from the list.
   
   

   
   ^{Fig.233 Maintain Alerts - Select Employees}

   
   
5. Click and the selected employees will populate in the 'Employee List' section.
6. Click on the 'Alert Level' tab.
   
   

   
   ^{Fig.234 Maintain Alerts - Alert Level}

   
   Alert Level Field Descriptions

   Field	Description
   Performance Alert Lower Limit	Indicates the acceptable lower level of normal performance that is being monitored.
   Performance Alert Upper Limit	Indicates the upper level of normal performance that is being monitored.
   Performance Critical Lower Limit	Indicates the acceptable lower level of critical performance that is being monitored.
   Performance Critical Upper Limit	Indicates the upper level of critical performance that is being monitored.
   Utilization Alert Lower Limit	Indicates the acceptable lower level of utilization that is being monitored.
   Utilization Critical Lower Limit	Indicates the acceptable critical lower level of utilization that is being monitored.
   Effectiveness Alert Lower Limit	Indicates the acceptable normal lower level of effectiveness that is being monitored.
   Effectiveness Critical Lower Limit	Indicates the acceptable critical lower level of effectiveness that is being monitored.
   Message	Type a corresponding message for any of the criteria (Performance, Utilization, and Effectiveness) depending on the Normal or Critical Limit.

   ^{Table 58. Alert Level Field Descriptions}
   
   Quality Threshold Field Descriptions

   Field	Description
   No. Of Errors - Alert Normal Limit	Indicates the acceptable number of errors for normal level for the given Unit Of Measure (UOM).
   No. Of Errors - Critical Limit	Indicates the acceptable number of errors for critical level for the given UOM.
   % Of Errors - Alert Normal Limit	Indicates the acceptable percentage of errors for normal level for the given UOM.
   % Of Errors - Critical Limit	Indicates the acceptable percentage of errors for critical level for the given UOM.
   UOM	Unit Of Measure (Cases, Lines, Pallets, Units).
   Message	Type a corresponding message for the criteria (No. of Errors or % of Errors) depending on the Normal or Critical Limit.

   ^{Table 59. Quality Threshold Field Descriptions}
   
7. To specify alert levels of the selected entities, type the relevant fields under the sections: Performance, Utilization, Effectiveness, and Quality Threshold (Total Errors or Use % of Errors).
8. Click the 'Subscriber' tab to select subscribers of the alert plan.
   
   

   
   ^{Fig.236 Maintain Alerts - Subscriber}

   
   
9. Click the 'Select Subscriber' link and the Search Employee screen appears.
   
   

   
   ^{Fig.237 Maintain Alerts - Select Subscribers}

   
   
10. Select the check boxes next to the employees to add them as a subscriber.
11. Click and the employees will be listed in the Maintain Alerts screen.
    
    

    
    ^{Fig.238 Maintain Alerts - Subscribers}

    
    
12. Click to save the plan.

    Info

    • To delete a subscriber select the corresponding check boxes and click on .