The Equipment screen allows the creation, viewing, editing, and deleting of equipment. Equipment speeds can be defined with a default value or specific speeds using distance intervals.

To access the Maintain Equipment screen:

1. Log in to ProTrack Warehouse.
2. Select the Equipment tab under Configuration menu. The Maintain Equipment screen appears.
   
   
   Maintain Equipment Tabs

   Tab	Description
   Equipment Type	Displays the details of an equipment.
   Speed Break	Displays the speed breaks associated with the selected equipment.
   Threshold	Displays the threshold factors associated with the selected equipment.

   ^{Table 31. Maintain Equipment Tab Descriptions}

Adding New Equipment

To add a new equipment:

1. Enter an Equipment Type Name, which can be alphanumeric.
2. Enter a unique Equipment Type ID, which can be alphanumeric.
   
   
   Maintain Equipment Field Descriptions

   Field	Description
   Equipment Type Name	Type the equipment name, which can be alphanumeric.
   Equipment Type ID	Type a unique equipment ID, which can be alphanumeric.
   Equipment Make	Type the details of the manufacturer.
   Manufacture Date	Select the date of manufacture.
   Equipment Model	Type the description for equipment model.
   Initial Cost	Enter the cost of the equipment in USD.
   Schedule Maintenance	Select a date for servicing.
   Notes	Type any additional information, if any.

   ^{Table 32. Maintain Equipment Field Descriptions}
   

   Fields that are in bold are mandatory, all other fields are optional. Click to enter dates for the Manufacture Date and Schedule Maintenance. The Equipment ID must match what is being sent in the WMS file.

   
   
3. Click on the 'Speed Break' tab.
   
   
   
4. To set a default horizontal and vertical speeds, enter the speeds in each field accordingly.
   
   
   

   If default speed breaks are entered then you cannot enter multiple speed breaks and the 'Add Speed' links are unavailable. All speeds must be in minutes per inch.

   
   
5. To set multiple horizontal and vertical speed breaks, click the 'Add Speed' link in the 'Vertical Speed' section of the table. 'Add Vertical Distance' popup appears.
   
   
   
   
6. Type the Upper Distance and Vertical Speed. Click to add the speed break.
7. Repeat until all speed breaks have been entered.
   
   

   Lower Distance will be greyed out as it uses the upper distance from the previous vertical speed break. This is done to avoid any overlapping of the speed breaks. Always enter the Upper Distance greater than the Lower Distance.